You pull the side cover (number 1 / 2 )  The whole Axel assembly will come out with the cover and you will be able to access the nut.  

From what youre describing, I'd expect it to be the Fuel sending unit.  Either it's hanging up and not droping past a certin level, or it's something on the electrical output side of things. (...

Ever since I bought this 1640 HST, the gas guage never goes below half a tank.  We sent it to service twice, they would send it back saying they couldnt find anything wrong even though the tan...

How do you access the axle nut to pull the axle so I can change the outer seal?

Couple things to start with: 1. Check battery - could be old or have corrosion on a connection 2. Check fuel filter, add some additive.

No video, but here is a diagram of the 5010 Gear Cab rear axle.

Other than what dealers have (which I don't believe are available to the pubic). No I don't believe anything is currently available.

I"m looking for a video or diagram on removing rear axle seals on a 5010 cab gear driven. Any help would be great. Best way to support the cab while pulling axle and hub assembly.

Here's some things to check: 1. Fuel tank vent - check fuel cap, make sure it is venting. Next time this happens crack the fuel cap and if you hear a whoosh sound and runs better, that's the probl...

Start up black smoke means too much fuel or not enough air. Check the air filter. Maybe get some fuel additive.    Blue smoke means oil is burning. Check oil level, may be overfilled.

I like the Flag! Great idea to not overlook that again.

I don't know where exactly it's located, but on the upper side of transmission/rear axle there should be a breather. Sounds like as the fluid is heating up it's not letting it breath, then the pres...

I'm not aware of any aftermarket out there that would be a direct replacment. I'm sure you could make something work with the right hoses and or modifing inlet outlet, and mounting. If you do that ...

You might also try cleaning out the exterior of the radiator. Dibris gets stuck on the fins and it acts like insulation not letting the radiator to dispurse heat as the air is flowing through it. D...

How old is the tractor? Or how many hours are on it?

I have looked and looked and came up empty handed. I would take that manual that shows the rotating seat, and the Serial number off the backhoe to your local deal and request that they make a suppo...

Can you post pictures? Pretty sure that metal base should come off with the screws.

Looking for a radiator for a 4110. The current one was patched after some serious damage. Looking for a after market replacement.

2016 Emax 25L -  700ish hours  - There is a fuse holder that provides power to the fuel solenoid that for some reason rattles loose and prevents the tractor from starting - you have to re...

I noticed mine does that at startup also -- does not some any after that -- Oil level is good -- i figured it was something to do with the fuel pump during that wait for the glow plug light to go o...